Publicité
Les langues disponibles
Les langues disponibles
Main unit parts and functions
A
STANDBY/ON switch
Use this to put the unit into standby mode or turn it on.
o If the display is off even though the STANDBY/ON switch is
set to ON, the cause is usually one of the following.
o The power is on, but DIMMER (display brightness) is set to
AUTO OFF (page 21).
o The automatic power saving function has activated, put-
ting the unit into standby (page 22).
o The power cord is disconnected.
o The unit is in standby because of the trigger function
(page 14).
To turn the unit on when the automatic power saving
function has activated, putting the unit into standby, press
the STANDBY/ON button on the remote control, or set the
STANDBY/ON switch to STANDBY once and then back to ON.
B
Disc tray
Load a disc here.
C
CLOCK indicator
This shows the clock synchronization status.
Lit:
The unit is currently synchronized with the clock from
the CLOCK sync input (10MHz IN) connector.
Blinking: No clock is being input, or the unit is trying to syn-
chronize with the clock signal.
Unlit:
External clock is not being used.
o See page 21 for clock sync settings.
D
Tray open/close (-) button
Press this to open and close the disc tray.
E
Remote control signal receiver
This receives signals from the remote control. When operat-
ing the remote control, point it at the remote control signal
receiver.
10
F
Display
This display shows information about the audio playing back
and menu screens.
G
Skip knob (.//)
Use this to skip to the previous or next track.
When the menu screen is open
Use this to select setting values.
Press this to start or confirm setting value selection.
H
MENU button
Press this to enter setting mode (page 20).
Press this when in setting mode to return to the previous
screen.
I
REPEAT (¼) button
Use this to change the repeat playback setting (page 17).
J
PLAY MODE button
Use this to switch between the ordinary, shuffle/random and
program playback modes.
K
Playback control buttons
Stop (8) button
Press this to stop playback.
Play (7) button
Press this when stopped or paused to start playback.
Pause (9) button
Press this during playback to pause.
Publicité
