Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Grease filters
A
B
Lighting
Universal cooker hood with remote motor
Clean the grease filters at least once a month. During cleaning, the
aluminium parts of the filters may become dull as a result of the
cleaning agents used, particularly when placed in the dishwasher. This
is normal and is not covered by the warranty.
Removing aluminium grease filter
1
Switch off the flap and lighting.
2
Unlock the grille (A) and hinge it downwards.
3
Push the wire brackets (B) aside.
4
Remove the grease filter from the grille.
Change the light bulbs
• Remove the grease filter. This gives access to the light bulbs.
• Unscrew the bulb from the fitting and replace it with a bulb
matching the wattage stated at the inside of the hood.
This cooker hood can only be used in combination with a mechanical
ventilation system, regardless of the brand of motor unit.
Control methods
• A the extraction is regulated with a switch on the motor unit.
• B the motor unit is regulated with a switch on the cooker hood.
The motor unit
• The motor unit must be single phase (230V-50Hz) with various
speeds.
• Whichever method of extraction is selected, it must never be
possible to switch the motor unit off (see for this only the motor unit
manual).
• The various possibilities are often given in terms of: medium or day
setting, high or cooking setting.
EN 9
Publicité
