Zanussi ZRT27100WA Notice D'utilisation page 12

Before first use
1. Clean the inner parts of the appliance and
all the accessories with warm water and
neutral detergent.
2. Make sure that the appliance and the ac-
cessories are fully dry.
3. Connect the mains plug to the mains sock-
et.
4. Activate the appliance and set the temper-
ature.
Do not use abrasive products, abrasive
cleaning pads or solvents to clean the ap-
pliance and the accessories.
Activating the appliance and setting the
temperature
Turn the temperature knob clockwise to acti-
vate the appliance and, at the same time, to
set the temperature.
The numbers that are on the knob refer to dif-
ferent temperatures of cold.
Daily use
Freezing the fresh food
The freezer is applicable to freeze fresh food
and for the storage of frozen food and of
deep-frozen food.
If the temperature knob is set at a medi-
um position, it is not necessary to change
the setting.
If you want to freeze the food more quickly, set
the temperature knob at a higher position. In
this condition, the temperature of the fridge
can decrease to 0 °C and more. If this occurs,
set the temperature knob to a lower position.
12
Turn the temperature knob to lower settings to
obtain minimum cold temperature.
Turn the temperature knob to higher settings
to obtain maximum cold temperature.
We recommend that you set a medium
cold temperature.
The conditions that follow can have an effect
on the temperature setting.
• The room temperature and the location
where the appliance is installed.
• How frequently the opening of the appliance
door occurs.
• The quantity of food that is in the appliance.
Storage of frozen food
Do not put immediately frozen food in the
freezer if the appliance is new or was deacti-
vated for a period of time.
Set the temperature knob at the highest posi-
tion and let the appliance operate for minimum
2 hours.
www.zanussi.com