Publicité
Les langues disponibles
Les langues disponibles
› To deactivate the system, set the"
HEATING CABLE "switch in the
Mobile Home electrical panel to
OFF.
ELECTRIC
WATER HEATE
70
EXI T(AC)
CAP
Image 3.
M O B I L E
SIMPLIFIED HYDRAULIC
SYSTEM FOR ELECTRIC
WATER HEATERSI
NON-RETURN
VALVE
EMPTYING
VALVE
CLOSING VALVE(AF)
ENTRANCE (AF)
DRAINPIPE FOR
EMPTYING
H O M E
M A I N T E N A N C E
G A S W AT E R H E AT E R S
The gas water heaters installed in
our homes can be of two types.
a. With watertight combustion
chamber these can be installed
inside the house - kitchen area
- or inside a special technical
compartment accessible from the
outside of the module.
b. With open combustion chamber
they can only be installed in a
technical compartment accessible
from the outside of the module.
For the technical characteristics,
we refer you to the use/
maintenance manual supplied by
the manufacturer of the water
heater itself.
FIRST IGNITION OF THE GAS
WATER HEATER
Read and acquire the information
contained in the water heater
manufacturer's use/maintenance
manual.
The first ignition of the gas water
heater and the assembly of the flue
gas exhaust terminal are not part of
Crippa Campeggio operations.
These operations must be carried
out by a qualified technician,
therefore we suggest having them
carried out directly by the technician
who is in charge of carrying out the
A N D
U S E
M A N U A L
gas connection to the Mobile Home
or to the local technical center.
PUTTING INTO ACTION
1. Never insert the gas bottle
Warning! Gas closing valve position specific for
water heater use.
into the technical compartment
- it could start a fire with an
explosion!!!
2. Mount the exhaust terminal with
a wind-proof cap supplied loose
inside the technical compartment
for transport problems (the exhaust
terminal must be mounted by
personnel technician; make sure
that the exhaust terminals are well
assembled and fixed using the
appropriate screws supplied).
71
Publicité
