CrippaConcept MOBILE HOME Manuel page 32

D R A I N A G E A N D
W AT E R A D D U C T I O N
S Y S T E M
DRAINAGE SYSTEM
A traditional toilet has been installed
in your Mobile Home which you
will need to channel to an existing
sewerage system (Image 1).
Even the shower, the sink and the
kitchen sink unload with the same
system.
62
The drain pipes used are:
› WC = 110 mm (already siphoned).
› Shower = 40 mm (siphon not
included).
› Washbasin = 40 mm (already
siphoned).
› Sink = 40 mm (already siphoned).
WATER ADDUCTION SYSTEM
The water distribution system is
made using non-toxic plastic pipes
Input = 1/2".
The MAX 3 BAR working pressure.
If your distribution system has more
pressure, irreversible damage to the
water system will occur.
It is therefore essential to install a
pressure regulator set at 2,5 – 3,0
BAR MAX.
M O B I L E H O M E
Image 1.
INPUT WATER
max 3,00 bar.
M A I N T E N A N C E A N D U S E M A N U A L
WATER ADDUCTION SYSTEM
Crippa Campeggio Mobile Homes
can be equipped with an additional
entrance (only for WC boxes),
recycled water.
The terminal of this additional
supply will be marked with this label.
ADDITIONAL ENTRY
for recycled water.
63