CrippaConcept MOBILE HOME Manuel page 33

R E Q U I R E M E N T S
F O R C O M M I S S I O N I N G
ELECTRIC SYSTEM
The electrical system of the Mobile
Home was installed in accordance
with current regulations.
The Crippa Campeggio Company
declines all responsibility to things
and people if all the precautions
dictated by this manual and
by behaviour based on normal
prudence will not be carried out.
64
The Mobile Home was created
for use similar to a civilian home,
therefore Crippa Campeggio srl
declines all responsibility if the user
uses it in the different ways than
those for which it was designed.
OPERATIONS TO BE CARRIED
OUT BEFORE PUTTING THE
STRUCTURE INTO FUNCTION
1. The operations must be carried
out exclusively by a qualified
technician.
2. Install the earth connection to the
terminal indicated in figure "A" by
the user with this label.
FIGURE "A".
M O B I L E H O M E
THE CONNECTION CAN BE MADE
IN TWO WAYS
› The user can connect to an
existing earth installation taking
care to appoint authorized
personnel in accordance with
the law both to carry out the
connection in a workmanlike
manner and to review it
periodically so that it is fully
functional.
› The connection must be made
using a rope covered with G/V
insulation material with a minimum
section of 16 mm2.
› In the absence of a system
described above, it is essential
to install a suitable earth plate
in reference to the current
legislation.
› The aforementioned operations
must be carried out by personnel
authorized in accordance with the
law.
› Once the work is completed,
the same must verify with an
instrumental assessment that the
value of the earth resistance is
within the limits allowed by the
Law.
› Only after having connected the
earth terminal it will be possible to
install the power cable (see next
chapter).
M A I N T E N A N C E A N D U S E M A N U A L
POWER SUPPLY
› The power supply to the electrical
system is via a plug socket
installed on the external structure
of the Mobile Home near the
symbol in figure "C".
› It will be the responsibility of the
user to supply the aforementioned
plug socket with a cable in
compliance with the currently
protected legislation (Image 2).
› Before connecting the electricity,
check the data indicated on the
sticker adjacent to the power plug.
"Standard power supply = 220V -
50Hz".
› The electrical system of your
Mobile Home is very similar to
that of most homes; the electrical
absorption varies according to the
accessories mounted on the house
itself.
› Before connecting the house to
the site's electrical power supply,
it must be verified by a qualified
technician, grounding, checking
that the values are within the
maximum permissible limits and
that the automatic differential
switch intervenes within the set
limits.
› Every year the Mobile Home
requires a review of the plant. On
request you can request the layout
of the electrical distribution wiring.
› In order to avoid any
inconvenience we recommend not
making any changes to the original
electrical system.
› It is recommended to replace the
bulbs with others having the same
Image 2.
FIGURE "C".
220 V
65