Atlantic Muraux DOJO Serie Notice D'installation Et D'utilisation page 42

4.5. Turbo and Quiet functions
Turbo and Quiet functions are compatible with HEAT and COOL modes.
Turbo function
Use the Turbo function to heat or cool quickly. Fan speed is on High.
•
Press the EXTRA FUNCTION button
The cycle sequence is as follows: Sleep > Health Airflow position 1 > Health Airflow position 2 > Turbo
> Air sending > A-B yard > SWING left/right.
•
Select Turbo function. The
• Press the CONFIRM/CANCEL button to activate the function.
•
Activate another function to deactivate Turbo function.
Quiet function
Use Quiet function to reduce the noise of the unit. Fan speed is on Low
•
Press the QUIET button
controller.
• Press the QUIET button again to deactivate the function.
• Operating the unit with Quiet function during a long period of time can prevent
reaching set temperature.
4.6. Timer function (Automatic power on or power off)
Set a Timer
1. When the unit is operating, select an operation mode.
2. Press the TIMER button
The cycle sequence is as follows:
Remote controller
display
3. Select a type of timer (TIMER ON, TIMER OFF or TIMER ON-OFF). "ON" or "OFF" flashes.
4. Use the time setting buttons to adjust time value. With each press, time value increases or
decreases by 0.5h, and 1h after 12h. The timer can be adjusted within 24h.
5. Press the CONFIRM/CANCEL button to validate the setting. "ON" or "OFF" stops flashing.
Cancel a Timer
Press and hold the TIMER button until the timer display disappears from the remote controller.
•
After replacing the batteries or a power failure, Set time settings again.
• TIMER ON / TIMER OFF and Start-Stop / Stop-Start are compatible.
42
to enter additional functions.
icon flashes.
to activate Quiet function. The
to enter Timer setting mode.
ON OFF
0.5h 0.5h
TIMER ON TIMER OFF TIMER ON-OFF
icon is displayed on the remote
ON OFF ON
0.5h 0.5h
TIMER OFF-ON
OFF BLANK