Atlantic Muraux DOJO Serie Notice D'installation Et D'utilisation page 39

4.1. Airflow orientation adjustment
Swing up-down
• Press the SWING button
COOL/DRY/AUTO modes:
HEAT mode:
Initial setting
• Press the SWING button again to select the swing position displayed on the remote controller.
•
Select positions 2 and 3 with the EXTRA FUNCTION button (See "4.3. Health Airflow function", page
41).
Swing left-right
Adjust the left-right airflow orientation by manually moving the deflectors.
On some models, there is a button on the unit to perform the adjustment.
•
When the airflow orientation is set, the position of the louvers is fixed.
• Turn the unit off before manually adjusting the position of the deflectors.
•
When there is a high level of humidity, condensation can occur. Adjust to the left or at
the air outlet if all vertical louvers are right.
• Operating the unit with the horizontal louver on a downward position in COOL or DRY
modes during a long period of time could result in condensation.
When the unit is powered off by the remote controller, the remote controller automatically saves the
most recent airflow setting.
4.2. Sleep function
•
Press the EXTRA FUNCTION button
follows: Sleep > Health Airflow position 1 > Health Airflow position 2 > Turbo > Air sending > A-B
yard > SWING left/right.
•
Select Sleep function. The
• Press the CONFIRM/CANCEL button to activate Sleep function.
•
Press the EXTRA FUNCTION button to deactivate the function.
. The cycle sequence is as follows:
to enter additional functions. The cycle sequence is as
icon flashes.
39