Atlantic Muraux DOJO Serie Notice D'installation Et D'utilisation page 37

1. Active operation mode display
Operation mode
Remote controller
2. Signal sending display
3. Active swing mode display
4. Active fan speed display
5. Locking of the remote controller display
6. TIMER ON or TIMER OFF display
7. Set temperature display
8. Additional functions display
9. QUIET button (To activate/deactivate Quiet function. See "4.5. Turbo and Quiet functions", page
42)
10. HEAT button (To activate/deactivate HEAT mode)
11. COOL button (To activate/deactivate A/C mode)
12. AUTO button (To activate/deactivate AUTO mode)
13. FAN button (To select a fan speed). The cycle sequence is as follows:
14. TIMER button (To set automatic start or stop timers for the unit. See "4.6. Timer function (Automatic
power on or power off)", page 42)
15. HEALTH button (To activate/deactivate Health function. See "4.4. Health function", page 41)
16. LOCK button (To lock or unlock the remote controller)
17. LIGHT button (To control the light level and stand by mode of the display board of the unit)
18. ON/OFF button
19. DRY button (To activate/deactivate DRY mode)
20. TEMP +/- button (To adjust set temperature. With each press, temperature value increases or
decreases by 1°C. Press and hold the button to change the temperature value faster.)
21. SWING button (To adjust the airflow angle. See "4.1. Airflow orientation adjustment", page 39)
22. Time setting buttons
23. EXTRA FUNCTION button (To activate/deactivate additional functions. The cycle sequence is as
follows: Sleep > Health Airflow position 1 > Health Airflow position 2 > Turbo > Air sending > A-B
yard > SWING left/right).
24. CANCEL/CONFIRM button (To cancel or validate a setting)
25. RESET button (When the remote controller does not operate normally, use a pointy instrument to
reset it)
Some functions are unavailable on some models
AUTO COOL
Function Quiet
Remote controller
Low Medium
DRY FAN
Health
Sleep Turbo
Airflow
AUTO
High
HEAT
37