Publicité
Les langues disponibles
Les langues disponibles
11 Disassembly / Reassembly Operation
Before each reassembly :
Clean the parts with appropriate cleaning solvent.
-
Fit new seals if necessary, after greasing them.
-
Grease the piston and the inside of the cylinder to avoid damaging the seals
-
(see table below),
Fit new parts if necessary.
-
Greases and thread lockers
designations
Index
Instruction
A 1
PTFE grease
A 2
Anti-seize grease
Medium strength
C 1
Aneorobic Pipe sealant
582131110-2B0225-indA-EN.docx
ATTENTION
Before any intervention, it is imperative to follow the
decompression procedure and the safety instructions.
ATTENTION
The equipment is subject to the ATEX directive and must
not be modified under any circumstances.
Failure to comply with this recommendation does not
engage our responsibility.
Description
'TECHNI LUB' grease
(10 ml / 0.0026 US gal)
Grease box (450 g / 0.99 lb)
Loctite 5772 (50 ml / 0.013 US gal)
27/10/2020
Disassembly / Reassembly Operation
Part number
560.440.101
560.420.005
554.180.015
37
Publicité
