Publicité
Les langues disponibles
Les langues disponibles
Use of the product
9 Use of the product
9.1 User settings
Wet Cup
Tightening of the Wet Cup
Tightening procedure
28
Before commissioning, fill the wet cup halfway with lubricant "T".
The wetting cup nut must be tightened moderately. Overtightening
quickly damages the gland packing. A wrench is supplied to allow
proper tightening.
Verify cup is filled with lubricant T,
Run the pump, then tighten the cup after 10 minutes, again
after 1 hour, then after1 day of operation,
In the event of a leak, the cup must be tightened.
Depressurize the Air motor (see depressurization procedure),
Depressure
procedure),
Tighten the cup, clean it and fill it with lubricant T,
Close the pump purge circuits,
Open the Air motor air valve.
27/10/2020
the
product
circuit
582131110-2B0225-indA-EN.docx
(see
depressurization
Publicité
