gourmetmaxx MS-308B Mode D'emploi page 14

❐ After cleaning all parts must be dry before the device can be
connected to the mains.
❐ Only connect the device to a properly installed socket with pro-
tective earth contacts. The socket must also be easily acces-
sible after the device has been connected. The mains voltage
must correspond to the technical data of the device. Only use
proper extension cords, whose technical data correspond to
those of the device.
❐ Lay the cord such that it is not crushed or creased and such that
it does not come into contact with hot surfaces.
For your health
❐ There may be some production residues stuck to the device.
Therefore, clean the device before fi rst use. For hygienic rea-
sons, you should also clean the device if there is leftover food
on the cutting blade after use (see chapter "Cleaning").
Beware of damage to the device
❐ Only use the device once it has been properly assembled and
the device, the mains cord or the mains plug does not exhibit
any visible damages. Do not use the device if it malfunctions,
has fallen down or in water.
❐ If the device, the mains cord or the mains plug is defective, do
not attempt to repair it yourself but have it repaired by a quali-
fi ed professional. In the event of damage, contact the customer
service department.
❐ Only use the enclosed accessories from the manufacturer.
❐ Do not allow the device to fall and do not expose it to severe
percussions.
❐ Do not subject the device to extreme temperatures, severe
changes in temperature, direct sunlight or moisture.
❐ Do not overheat the motor! Let the device cool off (for approx.
30 minutes) after no more than 10 minutes of continuous opera-
tion!
00043_de-gb-fr-nl_V0.indb 14 00043_de-gb-fr-nl_V0.indb 14
14
22.12.2014 13:26:55 22.12.2014 13:26:55