Component List - Fluval Flex Mode D'emploi

Component List

1. Glass Aquarium
2. Anti-slip Pad
3. Molded Cover
4. LED Light Unit
9
10
Installing your Aquarium
1. Carefully remove all components from packaging, verifying that every piece is accounted for and undamaged.
Refer to components list.
2. Thoroughly clean the interior and exterior of the aquarium using a cloth dampened with fresh water.
IMPORTANT: NEVER USE SOAP OR DETERGENTS to clean items placed inside the aquarium as they can be
harmful to fish and their environment.
3. AQUARIUM PLACEMENT
IMPORTANT: The Flex aquarium can weigh in excess of 135 kg (300 lbs) once decorated and filled,
therefore, please ensure the aquarium is placed on a specifically designed aquarium cabinet or stand.
Carefully position the anti-slip pad underneath the aquarium. Locate the aquarium and stand on a level, sturdy
surface and away from any electrical equipment, direct sunlight, drafts, heat sources or high traffic areas. Do
not place the aquarium where water spills will cause damage.
• Please ensure the cabinet or stand is sized to that of the aquarium and that it is designed to handle the weight
of a completely filled aquarium. Using a cabinet or stand not sized to that of the aquarium, or articles of furniture
and self-assembly furniture not designed for aquarium use will cause an unsafe condition.
• Please do not place anything other than the anti-slip pad underneath the aquarium. There should be no
additional support or damper in between the aquarium and the cabinet. Use a level to ensure that the aquarium
is perfectly level on the cabinet.
C D
4. PREPARING FILTER MEDIA
• Remove Carbon and Biomax media from plastic covering and rinse thoroughly.
• Insert Carbon in the top compartment of Foam filter block
• Lower entire foam filter block into rear of the aquarium filter compartment.
5. Circulation Pump
with Output Nozzle
6. 2 x Foam Filter Block
7. 2 x Activated Carbon insert
8. 2 x BIOMAX insert
4
7
5
A
B
E
9. Safe, Low Voltage
10. 4 x LED Brackets
3
1
6
8
5
A
B
(ill. 1)
A
and Biomax in bottom compartment
Transformer
(for the lighting unit)
and 8 x bracket screws
2
5
F G
B