Publicité
Les langues disponibles
Les langues disponibles
PEV-AW32 User Manual
7.1 Packing List
1
3
5
6
8
No.
Product Name
AC Charger
1
(with charging cable)
2
Wall-Mount Bracket
3
Product Certification
4
Expansion Screw
5
M6 Self-Tapping Screws
6
M4 Screws
7
M25 Cable Gland
8
RFID Card
2
4
7
9
Quantity
1
1
1
4
4
2
1
1
8
9
Needle Terminal
7.2 Tools & Materials Required
Tools required before installing the charger
onto the Wall-Mount Bracket are:
• Wire stripper
• Crimpers for terminals
• Phillips screwdriver for M4 ~ M6
• Slotted screwdriver for 4~5.5MM
• Voltmeter or digital multimeter (for
measuring
installation site)
• The inserting cable should meet the
best waterproof performance. It is
recommended to use a 3 core /
8AWG or 10mm² cable (XLPE or
equivalent cable) to pull the cable
from
the
maximum outer diameter of the
cable should be 13mm ~ 18mm.
• Level ruler
• Pencil or marker
• Machine drill
7.3 Wall-Mount Bracket Installation
Requirements
Before installing the wall-mount bracket, you
should confirm that the loading capacity of
the wall can reach a weight of 36 kg. When
installing on a cement wall, you can use the
included expansion screw to install the
bracket and use a cement drill to drill holes
on the cement wall (Ø8mm) following the
hole spacing in accordance with image 3.2.
When installing on a wooden wall, you can
directly use the included M6 self-tapping
screws to install the wall-mount bracket and
use the wall-mount backplane to lock and
install on the wall directly.
3
AC
voltage
at
distribution
box.
8
the
The
Publicité
