Publicité
Les langues disponibles
Les langues disponibles
PEV-AW32 User Manual
1. Important Safety Instructions
Please read all Important Safety Instructions as
well as charging instructions in your vehicle
owner's manual before attempting to charge
your electric vehicle. Failure to do so can result
in death or severe injury. Save this user manual
for future reference. There are many safety
features built into the charger. Read all the
safety information and warnings in this manual
to be avoid any risks or hazards and risks
associated with using this charger.
⚠
Warning
When
using
electric
precautions should always be followed. This
manual
contains
including the following, that must be followed
during installation, operation and maintenance.
•
Do not install or use the charger near
flammable,
explosive,
combustible materials, chemicals, or vapors.
•
Turn off the input power of the charger
before performing any maintenance to the
charger.
•
The device is designed only for vehicles that
are compatible with the SAE J1772 Level 2
charging standard.
•
Do not use the charger if it is defective,
appears
cracked,
damaged.
•
Do not attempt to open, disassemble, repair,
tamper with, or modify the charger. Contact
our Customer Service department if you
have any questions or require any parts
replacements or repairs.
•
Do not use the charger when you are, the
vehicle is, or the charger is exposed to
severe rain, snow, or other severe weather.
• When transporting the charger, handle it
with care and do not drag or step on the
device.
products,
basic
important
instructions,
corrosive,
frayed,
broken
• Do not touch the charging connector
terminal with any sharp metallic objects to
prevent damages.
• Do not forcefully pull the charging cable,
damage it with sharp objects, insert fingers,
or insert foreign objects into any part of the
charging connector.
• Risk of explosion. This device has arcing or
sparking parts that should not be exposed to
flammable vapors.
• Risk of electric shock. Do not remove the
cover or attempt to open the enclosure of
this device. There are no user-serviceable
parts inside. Contact a qualified service
company if you require any service repairs.
• To reduce the risk of fire, this charger should
only be connected to circuit overcurrent
protection in accordance with the National
Electrical Code, ANSI/NFPA 70, and the
Canadian Electrical Code, Part I, C22.1.
• This charger should be installed, adjusted,
and serviced by a qualified electrician or a
person familiar with the construction and
or
operation of this type of charger and the
dangers involved. Failure to observe this
precaution could result in damage to the
charger or even severe injury or death.
• Incorrect installation and testing of the
charger could potentially damage either
the vehicle's battery and the charger. This
type is damage is not covered by our
warranty policy.
or
• Ensure that the charging cable is well-
positioned during the charging process to
avoid the cable getting stepped on, tripped
over, or subjected to damage or stress.
• Do not use this charger with a frayed
charging cable with damaged insulation or
any other sign of damage.
• Ensure the wire type, diameter, current
rating, and temperature rating comply with
the
local
requirements in your local area.
• Before starting the installation, turn off all
power.
3
electrical
standards
3
and
Publicité
