Publicité
Les langues disponibles
Les langues disponibles
PEV-AW32 User Manual
Step 1
Select "SET" at the top of the webpage to
enter the network settings page.
Step 2
Select 3G/4G module to enter the 4G
settings page.
Step 3
Enter the Carrier APN and then click "OK."
Wait for the page to refresh. The page
should now show RSSI, and the Network
Connection "Status" should show
"Connected."
Step 4
After completion, click SET. Wait for the
setting completion window to appear.
Click "Confirm" to finish the setting. Restart
the charger.
*For other settings (such as OCPP, etc.),
please contact our professional staff.
8.7 Re-checking the Wi-Fi and 4G
Strength on Power-Up
After restarting the charger, check the
connection
(Received Signal Strength Indication) should
be higher than -65dBm. If the value is lower,
you may experience a weak Wi-Fi signal
connection or even disconnection. The
cause could be interference.
18
signal
strength.
18
The
RSSI
Publicité
