PlugEv PEV-AW32 Manuel De L'utilisateur page 10

PEV-AW32 User Manual
Step 3
15~18mm of the insulation sheath should be
stripped off the three AC wires. Take out the
included needle terminal and install the
needle terminal on the three GND/PE, L1/L,
L2/N wires. Pass the three wires through the
M25 waterproof gland Part 3.
Step 4
Insert the three wires into the wire holes of
the green terminal block to the
corresponding GND/PE, L1/L, L2/N and lock
them. The recommended screw torque is
1.5 N.m (13.3 lbf.in).
Step 5 (For Internet Edition model with 4G
function)
The SIM card slot is located on the right
side. Insert the SIM card according to the
image below.
Important Note: Before installing the SIM
card to the charger, it is necessary to
confirm that the SIM card has been
activated and the password has been
cancelled.
Step 6
10
10