Bosch HDS8655U Manuel D'utilisation page 16

en-us Accessories
Knob po- Function
sition
multi rack Switching on Multi Rack mode
conv bake Switching on Convection Bake
bake Switching on Bake
To operate: Turn to the required type of heating. Turn off
by turning the control knob to off.
Accessories 5 Accessories
Only use original accessories. These are designed espe-
Accessories
cially for your appliance.
Accessories
Wire rack
Telescopic rail
Meat probe
5.1 Other accessories
You can purchase other accessories from our Customer
Service, specialist retailers or online.
You will find a comprehensive range of products for your
appliance in our brochures and online:
www.bosch-home.com
Accessories are appliance-specific. When purchasing, al-
ways check for compatibility with your appliance model
number (E-Nr).
You can find out which accessories are available for your
appliance in our online shop or from our Customer Ser-
vice.
Wok ring
Use
¡ Only suitable for dual-flame burners. Use cookware with
a rounded bottom.
¡ Order number: HEZ9GW23UC
Griddle
Use
¡ The griddle plate allows meals that are usually cooked
in a pan to be prepared with reduced fat.
¡ Order number: HEZ9GR41UC
Side panel extension
Use
¡ Side cover for appliances without adjacent kitchen units.
16
Use
Inserting cake pans, baking
dishes, cookware, meat
and frozen meals.
36" order number:
11034062
Pull wire rack out further
without tipping.
Determining the degree of
cooking and the tempera-
ture in food items such as
meat and poultry.
5.2 Fitting the telescopic rail set
Instructions on fitting the telescopic rail set are enclosed
with the set.
5.3 Inserting racks
The wire rack can be inserted into the oven cavity at 5 dif-
ferent levels.
CAUTION
The oven racks and the oven cavity surfaces become very
hot during cooking.
Place oven racks in the desired positions before turning
▶
oven on.
Always use oven mitts when the oven is warm.
▶
If a rack must be moved while the oven is hot, do not let
▶
oven mitts contact hot heating elements.
Use caution when removing oven racks from the lowest
▶
rack position to avoid contact with the hot oven door.
CAUTION
To avoid possible injury or damage to the appliance, en-
sure oven rack is installed exactly per installation instruc-
tions and not backwards or upside down.
Always push racks in fully so that they do not touch the
door panel. Make sure that you always insert the racks
into the oven cavity the right way, and not backwards or
upside down.
Flat rack
The rack is designed with a stop so it will stop before com-
ing completely out of the oven.
Inserting the wire rack into oven
Grasp the rack firmly on both sides.
1.