Erasing A Track Mark; Moving Recorded Tracks - Sony MZ-R37 Mode D'emploi

Erasing a track mark

When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
1 2
Erase a track mark
.
1
Track numbers decrease
T MARK•CANCEL
(at the bottom)
=
1
While playing the track with the track
mark you want to erase, press P to
pause.
2
Find the track mark by pressing =
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. "00:00" appears in the display.
20-
GB
3 4
4
2 3
P•CAPS
=
P•CAPS
T MARK•CANCEL
3
Press T MARK to erase the mark.
"T. OFF" appears in the display. The
track mark is erased and the two
tracks are combined.
z
When you erase a track mark the name
assigned to the mark are also erased.

Moving recorded tracks

You can change the order of the recorded
tracks.
Before moving
Track A Track B Track C Track D
1 2
After
moving
$
Track A Track C Track B Track D
1 2
p•CHARGE
DISPLAY•EDIT•INSERT
(at the bottom)
3 4
Move track C
from the third to
the second track.
3 4
(•ENTER
= +
T MARK•CANCEL
(at the bottom)