Adding A Track Mark - Sony MZ-R37 Mode D'emploi

(•+
=
p•ENTER
1
Keep pressing EDIT for 2 seconds or
longer during stop. "
flashes in the display.
2
Press = or + ((•+ on the
remote control) repeatedly until
" " "Erase" flashes in the display.
3
Press ENTER.
"Erase?" and "ENTER" appear
alternately in the display.
To cancel erasing, press p or
CANCEL.
4
Press ENTER again.
"EDIT" flashes in the display, and all
the tracks will be erased.
When erasing is complete, "BLANK"
flashes in the display.
T MARK•CANCEL
EDIT•INSERT
" "Name"

Adding a track mark

You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
1 2
4
Track marking
.
1 2 3
Track numbers increase
T MARK•CANCEL
1
While playing or pausing an MD,
press T MARK on the recorder at the
point you want to add a mark.
"T. ON" appears in the display, and a
track mark is added. The track
number will increase by one.
To add track marks while
recording
Press T MARK.
Note
T MARK on the remote control does not
function during playback.
3 4
4 5
Bottom
19-
GB