Viscount Prestige 60 Guide Rapide page 33

The memories also include an [HR] button, also known as 0, which recalls the set up that was
present before a memory was activated. The contents of [HR] are not affected by calling up a
memory when another one has previously been activated.
In each memory, whether general or dedicated memory, the following can be saved:
- the voices (including Orchestra)
- the couplers
- the Tremulants (also with different speed and depth by activating this function on menu
Set-Up, see par. 4.3)
- the MIDI To controls (par.3), MIDI Solo (point 6 of this paragraph) and Program Change
set using the SEND PROGRAM CHANGE function ("Advanced Manual")
Only in the general memories is it also possible to save:
- the Organ Solo
- the Enclosed and Automatic Pedal (by activating the relevant function, see par. 4.3)
For the memory saving procedure, see point 3.
3. [S] button: "Set" button which enables memory saving. To save a memory, simply press the
[S] button and, keeping it pressed down, then press the button of the memory you wish to save,
whether it is dedicated or general.
4. [P] buttons: these buttons activate the couplings of the manuals with the pedal board, as follows:
o [P] (4A): coupling the second manual with the pedal board (II/P).
o [P] (4B): coupling the first manual with the pedal board (I/P).
5. [MEM+] and [MEM-] buttons: these buttons can be used to select the general memories in
ascending and descending order.
6. [M.SOLO] button: these buttons control the status of the MIDI Solo function for Man.II (6A)
and Man.I (6B). By activating this function, on the instrument connected to the [MIDI OUT]
port only the highest note of those pressed down will sound (monophony with priority given to
the highest note).
NOTE
The monophonic notes generated by the MIDI Solo are only sent on MIDI channel B.
For a detailed description of the MIDI channels controlled by the organ see the "Advanced
Manual".
7. [ENC] button: pressing this button activates the Enclosed function used to control the organ's
general volume by means of the [MAN.II] pedal.
8. [T] button: "Tutti" button, which turns on a preset series of voices and couplers.
The voice composition of the 'Tutti' function is programmable. To save a new set up, switch on
the voices and couplers of your choice, press [S] and, keeping it pressed down, then press
button [T] or the [TUTTI] foot piston.
9. [II] button: this button enables the coupling of the second manual with the first (II/I).
Quick Guide - Viscount Prestige 60
31