Ferroli OMNIA S 3.2 Manuel D'installation, D'utilisation Et D'entretien page 40

8. USER INTERFACE
The user interface consists of 7 keys and a display with dot matrix technology.
8.1 Key function description
The control system
SW1 SW3
SW4
SW2
SW5
fig. 38 -
8.3 Meaning of display icons
1 2 3
6 7
5
11
10 9
12
13
14
15
Index Icon Description
1 Water circulator
2 compressor
3 Additional heating source (boiler) Enabled when the boiler is active
System electric heater
4 External temperature
EN
106
ID key
SW1
SW2
SW3
SW4
SW5
SW6
SW6
SW7
SW7
4
8
17
16
Enabled when the pump is active
Enabled when the compressor is active
Enabled when the electric heater is active
Allows you to view the external air temperature.
Cod. 3541V941 - Rev. 05 - 06/2022
Key function description
Function Function details
UP On MAIN, select/scroll up/down between DHW
- SYSTEM or DHW - SYS. Z1 -SYS. Z2 if zone
DOWN
2 is enabled
Scroll up/down the menu rows in the menu
MENU/CONFIRM Access to the main menu and confirm parameter
value if changed
BACK Return to previous screen
OFF Switch off
-short press – switches of DHW or Z1 or Z2 de-
pending on the selection
- pressure >5 sec. switches off everything
(DHW-Z1-Z2)
UP VALUE - Increases DHW-Z1-Z2 set temperature
- Increases the parameter value selected in the
menu
DOWN VALUE - Decreases DHW-Z1-Z2 set temperature
- Decreases the parameter value selected in the
menu
18
Function
OMNIA S 3.2
20
19
Additional NOTE