Publicité
Les langues disponibles
Les langues disponibles
Operating external components with the remote control
Operating the DBS tuner or
CATV converter
7 To set the manufacturer's code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press DBS.
3
Press and hold F VCR/DBS.
Keep the button pressed until step 5 is finished.
4
Press ENTER.
5
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a GI Jerrold product: Press 0, then 1.
For a Sony product: Press 2, then 0.
Manufacturer
Echostar
GI Jerrold
Hamlin
Pioneer
RCA
Scientific Atlanta
Sony
Zenith
* "01" is the initial setting.
6
Release F VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
Before using the remote control to operate a
DBS tuner or CATV converter;
1 Set the remote control mode selector
to VCR/DBS.
2 Press DBS.
The following buttons are available:
F VCR/DBS:
Turns DBS tuner or CATV converter on and
off.
CH +/–:
Changes the channels.
1-10, 0, h10 (100+): Selects the channel.
15
Code
21
01*, 02, 03, 04, 05, 06, 07, 08
15, 16, 17, 18
13, 14
19
09, 10
20
11, 12
See page 14 for button locations.
Operating the VCR
7 To set the manufacturer's code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press VCR.
3
Press and hold F VCR/DBS.
Keep the button pressed until step 5 is finished.
4
Press ENTER.
5
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a Philips VCR: Press 0, then 9.
For an NEC VCR: Press 2, then 5.
Manufacturer
Code
JVC
01*, 02, 03
Emerson
11, 26
Fisher
29
Funai
10, 14, 15, 16
Gold Star
12
Hitachi
04
Mitsubishi
13
NEC
25
Panasonic
07, 17
* "01" is the initial setting.
6
Release F VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a
VCR;
1 Set the remote control mode selector
to VCR/DBS.
2 Press VCR.
The following buttons are available:
F VCR/DBS:
Turns VCR on and off.
3 (play button):
Starts playback.
7:
Stops operation.
8:
Pauses playback.
y:
Fast forwards video tape.
1:
Rewinds video tape.
Press this button together with 3 (play
REC:
button) to start recording or together with 8
to pause recording.
CH +/–:
Changes the TV channels on the VCR.
NOTE
• When operating a VCR or DBS tuner/CATV converter;
– The source setting of VCR or DBS remains after you have changed
the remote control mode selector to AUDIO or TV. When operating
VCR or DBS tuner/CATV converter again, it is not necessary to
press VCR or DBS after setting the remote control mode selector.
Manufacturer
Code
Philips
09
RCA
05, 06
Samsung
24
Sanyo
21, 22, 23
Sharp
27, 28
Shintom
30
Sony
18, 19, 20
Zenith
08
Publicité
