Publicité
Les langues disponibles
Les langues disponibles
Connections
Connecting the satellite (front,
center, surround) speakers
7 Assembling the front speakers
Front speaker
Stand (2)
(SP-THC43F)(2)
Assembled speakers
With stand: Refer to steps 1 to
3.
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
• Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injury.
1
9
Do not connect the power cord until all other connections have been made.
Base plate (2)
or
Without stand: Refer to steps
2 and 3.
Speaker
Stand
Screw M5 x 40 mm (supplied)
2
When assembling a speaker without stand:
Speaker
Stand (or speaker
directly)*
* When assembling the speaker with the base plate, use the
A
screws
.
3
Red
Black
A: Use these screws (M4 x
45 mm) when assembling the
speaker with the base plate.
Base plate
Screw M4 x 20 mm
(supplied)*
White
Black
You can route the speaker cord
by using speaker cord clamp
(supplied).
Publicité
