Samsung DVD-R150 Manuel De L'utilisateur page 29

Progressive scan
If the TV supports Progressive Scan, press the P.SCAN button on the front of
the DVD Recorder to enjoy.
Setting up the Progressive scan
1. With the DVD Recorder in Stop mode, press the P.SCAN button on the front
of the DVD Recorder.
The message "Press [Yes] to confi rm Progressive scan mode. Otherwise,
press [No]. " will appear.
2. Press the ◄ ► buttons to select Yes, and then press the OK button.
3. Set your TV to Progressive input (using the TV remote control.)
■
When the HDMI cable is connected, this screen is not displayed.
■
Do not press the P.SCAN button if you are using a TV that does not
support Progressive mode. Nothing will be displayed on the screen if
pressed.
■
Progressive setting is only available when the Video Out is set to
Component.
■
Progressive setting is only available when the DVD recorder is in stop
mode.
Canceling the Progressive scan
1. With the DVD Recorder in Stop mode, press the P.SCAN button on the front
of the DVD Recorder.
The message "Press [Yes] to confi rm Interlace scan mode. Otherwise, press
[No]. " will appear.
2. Press the ◄ ► buttons to select Yes, and then press the OK button.
3. Set your TV to Interlace input (using the TV remote control.)
■
If you press the P.SCAN button by mistake when your TV does not
support Progressive mode, you need to release the Progressive mode.
To release the Progressive mode, press the P.SCAN button on the front
panel 2 times.
■
The screen will recover after the PS
turns off .
English - 29
LED on the front panel display