Samsung DVD-R150 Manuel De L'utilisateur page 26

DVD-Recorder
System
No Disc
Programme
EP Mode Time : 6 Hours
Chapter Creator : Off
Setup
Quick Recording : Off
Anynet+(HDMI-CEC) : On Off
On
MOVE OK RETURN EXIT
DVDR
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver : Off
Setup
Move Ok
Exit
TV Menu
▌
Anynet+(HDMI-CEC) (DVD-R155 only)
Anynet+ is a function that can be used to operate the recorder using a
Samsung TV remote control, by connecting the DVD Recorder to a SAMSUNG
TV using a HDMI Cable. (see page 19) (This is only available with SAMSUNG
►
► TVs that support Anynet+.)
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button on the
remote control.
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3. Press the ▲▼ buttons to select System, then press the OK or ► button.
System menu will be displayed.
4. Press the ▲▼ buttons to select Anynet+(HDMI-CEC), then press the OK or
► button.
Anynet+(HDMI-CEC) items will be displayed.
5. Press the ▲▼ buttons to select On, then press the OK or ► button.
For using Anynet+(HDMI-CEC)
1. Connect the recorder with a Samsung TV and HDMI cable.
(See page 19)
2. Set the Anynet+(HDMI-CEC) to "On" on your DVD Recorder.
(see above)
3. Set the Anynet+ function at your TV.
(See the TV instruction manual for more information.)
• You can operate the DVD Recorder by using TV remote control. (TV buttons that
can be used to control the DVD Recorder :
, buttons,
• When you press Anynet+ button on the TV remote control, you can see left
OSD.
- Select Device : Use this option to select device.
- Record : Use this option to start recording or stop recording.
- Menu on Device : Same as MENU button on the DVD Recorder remote
control.
- Device Operation : Same as ANYKEY button on the DVD Recorder remote
control.
■
By pressing the PLAY button of the recorder while watching TV, the TV
screen will change to the play screen.
■
If you play a DVD when the TV power is off , the TV will power On.
■
If you turn the TV off , the DVD Recorder will power off
automatically.(When the DVD recorder is recording, it can't be
powered off .)
■
If you change the HDMI to other sources(Composite, Component,
RF... etc) in TV while playing the DVD disc, the DVD Recorder will
stop playing. But the DVD Recorder may keep the DVD disc playing
depending on navigation that the DVD disc supports.
English - 26
, ,
~ button)
, , , and