IARP GLEE 40 Instructions Pour L'utilisateur page 27

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
18. TEMPERATURE SETTING AND CONTROL
GLEE 40 / GLEE 43 LITE
Each refrigerating appliance is provided with an electronic control for automatic maintenance
of the appropriate pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold you can increment or decrement
the temperature:
1. Unlock the electronic controller by hold down "SET" button for 5 sec. (on the display the
word "UNLOCK" will appear).
1. Press the (SET) key in order to see on display the temperature set point.
2. Press the (▲) key or the (▼) key in order to increment or decrement the temperature
set point.
3. Press the (SET) key in order to store the new temperature set point.
LIGHT SWITCH
(Short pressure)
19. TEMPERATURE SETTING AND CONTROL
GLEE 43 PRIME
Each refrigerating appliance is provided with an electronic control for automatic maintenance
of the appropriate pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold you can increment or decre-
ment the temperature:
• Press the (C) key in order to see on display the temperature set point.
• Press the (A) key or the (B) key in order to increment or decrement the temperature
set point
• Press the (C) key in order to store the new temperature set point.
GLEE 40
GLEE 43 LITE / PRIME
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
A
A) Button to increase temperature
B)
Button to decrease temperature
C)
Button to show set temperature
D)
Light switch
B C
2 7 / 7 6
PAGE
UM000323
N° DOC
D