Technical data
Single-cylinder two-stroke
Piston displacement
Cylinder bore
Piston stroke
Max. power at speed
Max. torque at speed
Idling speed
Ignition system
Electronic, without breaker
Spark plug
or Spark plug
Electrode gap
Fuel system
Carburetor (for Canada)
Carburetor (for USA)
(all position diaphragm carburetor
with integral fuel pump)
Air filter
Fuel tank capacity
Fuel mixture
Weight
without cutting attachment
Cutting attachment
Guide bar
Cutting length
Safety saw chain (pitch) 3/8"
Drive link gauge .050"
Chain sprocket 6 teeth
Chain lubrication
Oil tank capacity
Approved bar and chain combinations
"Low-kickback saw chain is a chain which has met the
kickback performance requirements of ANSI B 175.1-
1991 (American National Standard for Power Tools-
Gasoline-Powered Chain Saws-Safety Requirements)
when tested on the representative sample of chain
saws below 3.8. C.l.D. specifed in ANSI B 175.1-
1991". The approved bar and chain combinations are
low kickback chains according to ANSI B 175.1-1991
and also meet the kickback requirements of CSA
Z62.3-96 for chain saws below 80 cm
The chain saw PS-340, PS-341, PS-400, PS-401 has
been approved with following guide bar and chain
combinations:
Guide bar 3/8"
length
Part no.
12" (30 cm)
412 030 661
14" (35 cm)
412 035 661
16" (40 cm)
412 040 661
"There may be other replacement bar and chain combi-
nations available that also reduces the risk of injury
from kickback".
18
PS-340
2.0 cu. in (33 cm
3
) 2.0 cu. in (33 cm
1.45" (37 mm)
1.45" (37 mm)
1.22" (31 mm)
1.22" (31 mm)
1.4/9,000 kW/rpm
1.4/9,000 kW/rpm 1.7/9,000 kW/rpm
1.7/6,500 Nm/rpm 1.7/6,500 Nm/rpm 2.0/6,500 Nm/rpm 2.0/6,500 Nm/rpm
2,600 rpm
NGK BPMR 6F
NGK BPMR 6F
CHAMPION RDJ-7Y CHAMPION RDJ-7Y CHAMPION RDJ-7Y CHAMPION RDJ-7Y
.020" (0.5 mm)
.020" (0.5 mm)
WALBRO WT 174
WALBRO WT 174
WALBRO WT 466
WALBRO WT 466
Robkoflok
13.3 oz. (0.4 l)
13.3 oz. (0.4 l)
see chapter "Fuel"
see chapter "Fuel"
8 lbs. 9 oz. (3.9 kg)
8 lbs. 9 oz. (3.9 kg) 8 lbs. 13 oz. (4.0 kg) 8 lbs. 13 oz. (4.0 kg)
sprocket nose bar sprocket nose bar sprocket nose bar sprocket nose bar
12" (30 cm)
12" (30 cm)
14" (35 cm)
14" (35 cm)
16" (40 cm)
16" (40 cm)
(528 092 ...)
(528 092 ...)
X
(028 223 310)
(028 223 310)
fully automatic oil
fully automatic oil fully automatic oil
pump
7.1 oz. (0.21 l)
7.1 oz. (0.21 l)
3
.
Saw chain 3/8"
Part no.
528 092 046
528 092 052
528 092 056
PS-341
PS-400
3
) 2.4 cu. in (39 cm
1.57" (40 mm)
1.22" (31 mm)
2,600 rpm
2,600 rpm
NGK BPMR 6F
.020" (0.5 mm)
WALBRO WT 174
WALBRO WT 466
Robkoflok
Robkoflok
13.3 oz. (0.4 l)
see chapter "Fuel"
12" (30 cm)
14" (35 cm)
16" (40 cm)
(528 092 ...)
X
(028 223 310)
pump
pump
7.1 oz. (0.21 l)
WARNING
Do not use other replacement bars and chains
unless they have been designated as meeting the
ANSI B 175.1-1991 (for USA) and CSA Z62.3-96
(for Canada) kickback performance requirements
on that specific powerhead, or has been desig-
nated as "low kickback" saw chain in accordance
with the ANSI B 175.1-1991 (for USA) and CSA
Z62.3-96 (for Canada) standard.
PS-401
3
) 2.4 cu. in (39 cm
1.57" (40 mm)
1.22" (31 mm)
1.7/9,000 kW/rpm
2,600 rpm
NGK BPMR 6F
.020" (0.5 mm)
WALBRO WT 174
WALBRO WT 466
Robkoflok
13.3 oz. (0.4 l)
see chapter "Fuel"
12" (30 cm)
14" (35 cm)
16" (40 cm)
(528 092 ...)
X
X
(028 223 310)
fully automatic oil
pump
7.1 oz. (0.21 l)
3
)