Assigning The Secvest To The Wireless Switch Key And Deleting It - Abus FUBE50061 Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 64
8.6.2. Assigning the Secvest to the wireless switch key and
deleting it
Only in operating mode 1
1. Put the wireless key switch into pairing mode.
2. Press the programming button (15) six times.
display. Hold down the button until
3. After letting go of the button,
4. Pairing mode is now activated. A new Secvest can now be taught in
within the next four minutes.
5. In installer mode, select the menu item "(Other) components  Info
module  Program info module (add panel)". Transmit the pairing
signal from the wireless alarm panel to the wireless key switch.
6. Once the pairing signal has been received by the wireless key switch,
it will emit a double beep.
7. Confirm the successfully completed pairing process on the Secvest
wireless alarm panel.
Note
If you are pairing a new Secvest wireless alarm panel with the wireless key
switch, previous pairing data on the wireless alarm panel are automatically
deleted.
appears on the display.
will briefly appear on the display.
EN 20
will appear on the

Publicité

Table des Matières
loading

Table des Matières