Abus FUBE50061 Manuel D'installation Et D'utilisation page 50

When you have reached the desired value, hold down the button until
appears on the display to confirm. When you release the button, the display
shows to indicate that the second partition is being set, and the
procedure can be repeated.
The third partition is indicated by , and the fourth by .
Program all four partitions in this way.
Note
Be sure to set the partition for which the user or user code has
authorisation to "Selected" (
).
Partitions can be assigned to the relevant user via the user menu of your
Secvest wireless alarm panel under the menu item:
Users  Edit User Partition
Note
Please note that if you wish to select several partitions, these partitions
should be assigned the same types and delay times when programming
your Secvest wireless alarm panel.
We recommend using only one partition. This also ensures that the status
feedback from the panel remains clear.
EN 18