Télécharger Imprimer la page

Sony XR-CA410 Mode D'emploi page 25

Publicité

Les langues disponibles
  • FR

Les langues disponibles

RDS
Problem
The SEEK starts after a few
seconds of listening.
No traffic announcements.
PTY displays "NONE."
CD/MD playback
Problem
The sound skips.
Error displays (when an optional CD/MD unit is connected)
The following indications will flash for about five seconds, and an alarm sound will be heard.
Display
Cause
The disc magazine is not inserted in
NO MAG
the CD/MD unit.
No disc is inserted in the CD/MD unit.
NO DISC
A CD is dirty or inserted upside
down.*
1
*
An MD does not play because of some
ERROR
problem.*
A CD/MD cannot play because of
some problem.
1
*
No tracks have been recorded on an
BLANK
MD.*
The CD/MD unit cannot be operated
RESET
because of some problem.
NOT READY
The lid of the MD unit is open or MDs
are not inserted properly.
HI TEMP
The ambient temperature is more than
50°C.
1
When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear
*
in the display.
2
The disc number of the disc causing the error appears in the display.
*
If the above-mentioned solutions do not help improve the situation, consult your nearest Sony
dealer.
Cause/Solution
The station is non-TP or has a weak signal.
t Press (AF) or (TA) repeatedly until "AF-OFF" or
"TA-OFF" appears.
•Activate "TA."
•The station does not broadcast any traffic announcements
despite being TP.
t Tune to another station.
The station does not specify the programme type.
Cause/Solution
A dirty or defective disc.
2
2
2
Solution
Insert the disc magazine in the CD/
MD unit.
Insert discs in the CD/MD unit.
Clean or insert the CD correctly.
Insert another MD.
Insert another CD/MD.
Play an MD with tracks recorded on
it.
Press the reset button of the unit.
Close the lid or insert the MDs
properly.
Wait until the temperature goes
down below 50°C.
25

Publicité

loading

Ce manuel est également adapté pour:

Xr-ca400