Sony XR-CA410 Mode D'emploi page 17

Press (DSPL) to change
the displayed items.
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
To increase
To decrease
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SEL) for two seconds while
pushing the VOL control.
Adjusting the sound
Press (SEL) to
characteristics
adjust and select.
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
1
2
Attenuating the sound
To restore the previous volume level, press
(ATT) again.
"ATT-OFF" flashes momentarily.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).
Select the item you want to adjust by
pressing (SEL) repeatedly.
Each time you press (SEL), the item
changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear)
Adjust the selected item by pressing
either side of the volume button.
Adjust within three seconds after selecting
the item.
Press (ATT).
After "ATT-ON" momentarily flashes, the
"ATT" indication appears in the display.
17