Amana NTW4700YQ1 Guide D'utilisation Et D'entretien page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.amana.com/help
If you experience
Washer not performing as expected (cont.)
Not cleaning or
Using too much detergent.
removing stains
(cont.)
Not using correct cycle
for fabric type.
Not using dispensers.
Not washing like colors
together.
Incorrect dispenser
Clogged dispenser.
operation
Fabric damage
Sharp items were in
pockets during wash cycle.
Strings and straps could
have tangled.
Items may have been
damaged before washing.
Fabric damage can occur
if load is tightly packed.
Liquid chlorine bleach
may have been added
incorrectly.
Garment care instructions
may not have been
followed.
Monthly maintenance not
Odors
done as recommended.
Using too much detergent.
Lid Locked light is
The lid is not closed.
flashing
A cycle was stopped or
paused using the START/
Pause/Unlock Lid button.
14
for assistance and to possibly avoid a service call.
Possible Causes
The suds from too much detergent can keep washer from operating correctly.
Always measure detergent and follow manufacturer's directions based on load
size and soil level.
Use a higher soil level cycle option and warmer wash temperature to improve
cleaning.
Use Normal Heavy cycle for tough cleaning. See the "Cycle Guide" to match
your load with the best cycle.
Use dispensers to avoid chlorine bleach and fabric softener staining.
Load dispensers before starting a cycle. Set Fabric Softener option knob
to YES when using fabric softener.
Do not add products directly onto load.
Wash like colors together and remove promptly after the cycle is complete
to avoid dye transfer.
Use only liquid chlorine bleach in the bleach dispenser. Use only fabric
softener in the fabric softener dispenser.
Empty pockets, zip zippers, and snap or hook fasteners before washing
to avoid snags and tears.
Tie all strings and straps before starting wash load.
Mend rips and broken threads in seams before washing.
Load garments in loose heaps evenly around the basket wall. Load with dry
items only.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 additional garments after washer has started.
Do not pour liquid chlorine bleach directly onto load. Wipe up bleach spills.
Undiluted bleach will damage fabrics. Do not use more than
recommended by manufacturer.
Do not place load items on top of bleach dispenser when loading and
unloading washer.
Always read and follow garment manufacturer's care label instructions. See
the "Cycle Guide" to match your load with the best cycle.
See "Cleaning Your Washer" in Washer Maintenance.
Unload washer as soon as cycle is complete.
Be sure to measure correctly. Always follow the manufacturer's directions.
See "Cleaning your Washer" section.
Close the lid. The washer will not start or fill with the lid open.
The washer may still be spinning. The lid will not unlock until the basket
has stopped spinning. This may take several minutes if washing large loads
or heavy fabrics.
Solution

Publicité

Table des Matières
loading

Table des Matières