Marmitek PC CONTROL Mode D'emploi page 9

even when you are in VCR, DVD or SAT mode. No need to select the TV mode.
mode: turns All Home Automation module off.
[13] A/V
Selection of an external source (SCART input).
[14] --/-
If you are in programming mode - automatic code search - you can confirm the code of
the device you want to control. In connection with the numeric keys, this button allows
you with some equipment to select directly channels higher than 9.
[15] OK
Confirms menu selection.
[16] Teletext ON: Start/stop Teletext.
Teletext OFF: Stop Teletext.
Info: Displays information of the selected appliance.
Teletext Hold: Stop page change in teletext mode.
[17] Navigation keys
Up, Down, Right, Left. Allows you to navigate into the menu (TV, DVD, etc).
[18] Menu
Menu On
[19] Exit
Menu OFF
[20] Rew
In VCR, DVD or CD mode: This button works the same way as in your original remotes.
IN TV mode: Coloured key (Red), control of videotext or special equipment functions.
[21] Fast Forward
In VCR, DVD or CD mode: This button works the same way as in your original remotes.
IN TV mode: Coloured key (Blue), control of videotext or special equipment functions.
[22] Play
In VCR, DVD or CD mode: This button works the same way as in your original remotes.
IN TV mode: Coloured key (Yellow), control of videotext or special equipment functions.
[23] Stop
In VCR, DVD or CD mode: This button works the same way as in your original remotes.
IN TV mode: Coloured key (Green), control of videotext or special equipment functions.
[24] REC (record )
This key works the same way as the one on your original remote for your VCR. In order to
avoid a mistake you have to press this key twice to activate this feature.
[25] Pause
In VCR, DVD or CD mode: This button works the same way as in your original remotes.
IN TV mode: Coloured key (Magenta), control of videotext or special equipment functions.
PC CONTROL 9