SOLAC CT8626 Mode D'emploi page 12

IMMERSE IN WATER OR ANY OTHER LIQ-
UID.
Clean the equipment with a damp cloth with a
•
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
•
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
The blanket may be washed by hand or on the
•
WOOL or DELICATES setting of the washing
machine at a temperature of up to 40ºC. Re-
move the control before washing. The control
must never be submerged in water.
Dry the product immediately after any clean-
•
ing task making sure that the appliance inlet is
perfectly dry.
Never submerge the connector in water or any
•
other liquid or place it under running water.
WHEN NOT IN USE, STORE AS FOLLOWS:
Let the appliance cool down before storing and
•
fols so that it is flat without creases.
When the appliance is not in use, keep in a dry
•
place and avoid placing heavy objects on top
as they could damage the cables.
Avoid creases forming. Check the appliance
•
and power cord frequently to make sure they
are in perfect condition.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
•
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
•
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
The product does not contain concentrations of
•
substances that could be considered harmful
to the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of Waste
from Electric and Electronic Equipment (WEEE).
This appliance complies with Directive 2014/35/
EU on Low Voltage and Directive 2014/30/
EU on Electromagnetic Compatibility, Directive
2011/65/EU on the restrictions of the use of cer-
tain hazardous substances in electrical and elec-
tronic equipment and Directive 2009/125/EC on
the ecodesign requirements for energy-related
products.
EN