Kärcher K 2 Power Control Mode D'emploi page 14

Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
Storing the device
1. Place the device on a level surface.
2. Disconnect the spray lance from the
high-pressure gun.
3. Disconnect the high-pressure gun
from the high-pressure hose.
4. Disconnect the high-pressure hose
from the device.
5. Store the high-pressure hose on the
device.
6. Store the power-supply cord and ac-
cessories on the device.
Observe the additional notes before
storing the device for a long period of
time, see chapter Care and service.
Frost protection
ATTENTION
Danger of frost
Incompletely emptied devices can be
destroyed by frost.
Completely empty the device and ac-
cessories.
Do not store outdoors!
To avoid damage:
The following requirements must be satisfied:
● The device is disconnected from the
water supply.
● The high-pressure hose is removed.
1. Switch the device on "I/ON".
2. Wait for a maximum of 1 minute un-
til no more water escapes from the
high-pressure connection.
3. Switch off the device.
4. Store the device together with all ac-
cessories in a frost-save room.
14
Care and service
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the GFCI plug.
The device is maintenance-free, so it is
not necessary to carry out regular
maintenance work.
Clean the sieve in the water
ATTENTION
Damaged sieve in the water connec-
tion
Damage to the device due to water
contamination
Check the sieve for damage before in-
serting it in the water connection.
If necessary, clean the sieve in the wa-
ter connection.
1. Remove the coupling from the water
connection.
2. Pull out the sieve with flat pliers.
3. Clean the sieve under running wa-
ter.
4. Insert the sieve into the water con-
nection.
English
connection