Publicité
Les langues disponibles
Les langues disponibles
Technical Data
Duplex grinding machine GDS 150.1 L
Art. No ................................................................................55271
Service connection ..................................230 V~50 Hz
Max. Power ..............................350 W (P1/S2/30 min.)
Idle speed .......................................................2980 min
Grinding wheel dimensions .......................150x20 mm
Engine shaft diameter ....................................12,7 mm
Weight .......................................................................9,6 kg
Noise and Vibration Information
Sound pressure level L
1), 2)
pA
Guaranteed sound power level L
Wear ear protectors!
Measured according to EN ISO 11202:1995/AC:1997,
1)
under load, Uncertainty K=3 dB (A)
The values stated are emission values and as such do not necessarily constitute values which are safe for the
2)
workplace. Al- though there is a correlation between emission levels and environmental impact levels, whether
further precautions are neces- sary cannot be derived from this. Factors influencing the actually present envi-
ronmental impact level in the workplace include the characteristics of the work area and other noise sources, i.e.
the number of machines and other neighbouring work process- es. The permitted workplace values can likewise
vary from country to country. This information is intended to assist the user in estimating hazards and risks.
Read and understand the operating instructions
before using the appliance. Abide by all the safety
measures stated in the service manual. Act responsib-
ly toward third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
Double grinding machines for removing frays, grinding
and sharpening of steel and steel alloy workpiecesDo not
use this product in any other way as stated for normal
use. Respecting technical data and safety precau-
tions.Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.
-1
...................................82 dB (A)
.................93 dB (A)
2)
WA
Duplex grinding machineGDS 200.1 L
Art. No ................................................................................55272
Service connection ..................................230 V~50 Hz
Max. Power ...................................520 W (P1/S6/15%.)
Idle speed .......................................................2980 min
Grinding wheel dimensions .......................200x25 mm
Engine shaft diameter .......................................16 mm
Weight ........................................................................18 kg
Noise and Vibration Information
Sound pressure level L
1), 2)
pA
Guaranteed sound power level L
Wear ear protectors!
Measured according to EN ISO 11202:1995/AC:1997,
1)
under load, Uncertainty K=3 dB (A)
Power tool description
1.
LED-Lamp
2.
Grinding wheel with magnifier
3.
K60 abrasive wheel
4.
Workpiece support
5.
ON/OFF switch
6.
Socket
7.
Work table installation opening
8.
Protective wheel
9.
K36 abrasive wheel
10.
Abrasive wheel cover
11.
Levelling
12.
Protection against sparks
ENGLISH
-1
...................................82 dB (A)
.................95 dB (A)
2)
WA
19
Publicité
