Télécharger Imprimer la page

Nilfisk Advance SC4000 Mode D'emploi page 4

Ecoflex

Publicité

Les langues disponibles

Les langues disponibles

A - ENGLISH
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the shipping packaging and the machine for damage. If damage is evident, save the shipping
carton (if applicable) so that it can be inspected. Contact the Nilfisk Customer Service Department immediately to file a freight damage claim.
Refer to the unpacking instruction sheet included with the machine to remove the machine from the pallet.
TRANSPORTING THE MACHINE
CAUTION!
Before transporting the machine in an open truck or trailer, make sure that . . .
All tanks are empty.
All access doors are latched securely.
Lower scrub deck and squeegee then press Emergency Stop (A) or disconnect batteries to prevent them from raising when the machine is
powered off.
The machine is tied down securely - see Tie Down Locations (21) in "Know Your Machine". Only use locations designated as "Tie Down
Locations" to secure the machine during transport. Using any other location of the machine to tie down the machine may cause damage or
injury.
The machine's electromagnetic brake is engaged (not manually overridden), see "Electromagnetic Brake" section if necessary.
The machine is turned off and the magnetic SmartKey™ is removed.
A - 4
INSTRUCTIONS FOR USE
Advance SC4000 - 56091272
9/2022

Publicité

loading