MAINTENANCE
MAINTENANCE SCHEDULE
Clean the surface of the Magnetic SmartKey Reader (22)
Check Each Battery Cell(s) Water Level (wet lead-acid batteries)
* Cleaning the solution tank is only needed if you use a mixture of water and cleaning detergent within the tank.
** Have Nilfisk check the carbon brushes for; vacuum motor(s) after 1200 recovery hours (replace motor(s) after 2000 recovery hours), scrub motors
(disc & cylindrical) after 1200 scrub hours.
NOTE: Refer to the Service Manual for more detail on maintenance and service repairs.
9/2022
MAINTENANCE ITEM
Check/Clean Tanks & Hoses
Check/Clean/Rotate the Brushes/Pads
Check/Clean the Squeegee
Empty/Clean Debris Catch Tray in Recovery Tank
Check/Clean the vacuum motor foam filter(s)
Clean Hopper on Cylindrical System
Inspect Scrub Deck Blades
Inspect and clean Solution Filter
Clean Solution Trough on Cylindrical System
Purge Detergent System (EcoFlex only)
* Clean Solution Tank
Lubrication – see "Lubricating the Machine"
** Check Carbon Brushes
INSTRUCTIONS FOR USE
Daily
Charge Batteries
X
X
X
X
X
X
X
56091272 - Advance SC4000
ENGLISH - A
Weekly
Monthly
Yearly
X
X
X
X
X
X
X
X
X
A - 33