Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE MACHINE (DISC & CYLINDRICAL)
FIGURE 3-1
23
AA
WET VACUUMING
Steps to follow in fitting the machine with optional attachments for wet vacuuming.
1
Disconnect the recovery hose (29) from the squeegee mount. Connect the coupler and hose from the wand kit to the recovery hose.
2
Attach suitable wet pick-up tools to the hose. (An optional Vac Wand Kit PN 56116355 is available from Nilfisk).
3
Place the magnetic SmartKey onto the SmartKey Reader (22) and press the Power Switch (H). While standing alongside the machine (not on the seat)
press the Vacuum Switch (G). The vacuum motor will run continuously until the switch is pressed again to turn it OFF. The Wand Indicator (C17) is
displayed. NOTE: Pressing the Vacuum Switch (G) while seated on the machine will cause the squeegee to lower and the vacuum motor(s) to run while
machine is moving forward. The Vacuum Indicator (C16) will be displayed.
9/2022
C10
C5
24
32
33
INSTRUCTIONS FOR USE
C
C1
M+
C3
O
N
M
M-
L
25
28
29
30
31
56091272 - Advance SC4000
B
F+
G
H
K
J
ENGLISH - A
D
E
F
F-
A - 29
Publicité
