Télécharger Imprimer la page

Sennheiser HDV 820 Manuel D'instructions page 21

Masquer les pouces Voir aussi pour HDV 820:

Publicité

Selecting the audio source
WARNING
Danger of hearing damage!
Before switching to a different audio source, first set the volume on
the headphone amplifier to a low level. Different audio sources and
different listening material (e.g. different pieces of music on different
CDs/sound carriers) can have widely varying signal levels. In the
case where you switch to a higher level audio source from a lower
one without first reducing the volume level this can lead to high vol-
ume levels in the headphones and could damage your hearing.
Set the volume on the headphone amplifier to a low level (see
page 22) before switching to a different audio source.
Use the Input selection rotary switch to select your connected
audio source.
The Input selection LED lights up white, indicating the selected
audio source.
o
Selection
Selected audio source on the headphone amplifier
USB (digital), the DSD reproduction LED might
USB
also light up white (see page 12)
OPT
Optical (digital)
COAX
Coaxial (digital)
UNBAL
RCA (analog)
BAL
XLR-3 (analog)
Using the HDV 820
HDV 820 | 21

Publicité

loading