SOLIS VAC SMART Mode D'emploi page 93

7. We recommend that you do not use an extension cable with
this appliance. Do not place the appliance directly underneath
a power socket.
8. Before you insert or remove the plug from the socket, please
always check that the cover is not locked shut.
9. Place the appliance while in function on a stable, level and dry
surface, like a table or work surface. Do not use the appliance
outdoors.
10. Unplug the appliance when it is not in use or unattended, and
before cleaning. We recommend the use of a residual current
device (RCD safety switch) to ensure additional protection
during the use of electrical appliances. It is advisable to use a
safety switch with a rated residual operating current of 30 mA
maximum. For professional advice consult an electrician.
11. Do not make any adjustments to the appliance, cable, plug or
accessories.
12. Incorrect use may cause injury!
13. Never take hold of an appliance that has fallen into water.
Always take the plug out of the power socket before removing
the appliance from the water. Do not use the appliance again
until you have had it's ability to function safely checked by Solis
or a Solis approved service centre.
14. Never place the appliance where it could fall into water or may
come into contact with water (e.g. in a sink).
15. Never submerge the appliance, power cable or plug in water,
or bring it into contact with water or other liquids.
16. Place the appliance so that it is never exposed to direct sunlight.
17. Never put sharp or pointed objects and tools into the appliance
openings. The appliance may become damaged – danger of
electric shock!
18. Do not shake or relocate the appliance while it is in operation.
93