SOLIS VAC SMART Mode D'emploi page 117

TH E C ON TA IN E R WI LL N O T V A CU UM
1. Check whether the air extraction hose is securely attached to the lid of the con-
tainer and the air-extraction opening on the appliance.
2. Press down on the lid or the hose connection to ensure that the container is
airtight.
3. If the container or the adaptor is visibly damaged, change the container or
adaptor. Make sure that the container lid is tight all around.
4. If fluid leaks from the container during vacuuming, the container and it's con-
tents should first be cooled in the fridge.
5. Check the functioning of the appliance.
6. Check that the edge of the container and the lid are completely dry and that
there is 3 cm distance between the food and the top edge of the container.
If none of these suggestions apply, please contact Solis or a Solis approved service
station.
T H E HEX A G O N A L CO N TA IN E R IS NOT MAINT AIN ING
A V AC UU M
1. Check that control dial is at the "SEAL" position, before, during and after
vacuuming.
2. Check that the rubber seal is sitting correctly and is undamaged.
T H E SQ UA R E CO N TA IN E R I S N O T MAINT AINING
A V AC UU M
Check that the rubber seal is sitting correctly and is undamaged.
117