Table des Matières
Publicité
106
Settings
Code C0
Setting the factory-adjusted modes of operation
F
(
5.)
0* =
No action
1 =
Set default values
(state 1 is only shown briefl y)
The selected mode of operation can be transferred to
the permanent memory.
Code C1
Selecting the defi nition of the imbalance value in steps
Selecting the defi nition of the imbalance value in steps
Selecting the resolution of unbalance readings in
from 0.05 or 0.25 oz. (respectively 1 or 3,5 grams).
from 0.05 or 0.25 oz. (respectively 1 or 3,5 grams).
1 or 5 g, or 0.05 or 0.25 oz increments
0*
0*
=
=
0,25 oz (5 grams) defi nition
3,5 grams (0,25 oz) defi nition
0* =
5 g (0.25 oz) increments
1
1
=
=
1 gram (0,05 oz) defi nition
0,05 oz (1 gram) defi nition
1 =
1 g (0.05 oz) increments
The selected mode of operation can be transferred to
the permanent memory.
Code C2
Selecting suppression of minor unbalance
readings
0* =
Suppression off
1 =
Suppression on
The selected mode of operation can be transferred to
the permanent memory.
Code C3
Selecting unbalance readings in grammes or
ounces, active when the machine is switched on
1* =
Readings in ounces
0* =
Readings in grammes
0 =
Readings in grammes
1 =
Readings in ounces
The selected mode of operation can be transferred to
the permanent memory.
* = Factory adjusted mode
Publicité
Table des Matières
