Craftsman 919.672190 Mode D'emploi page 8

1. Remove cleaning solution tanks
from frame assembly. Slide tanks up
and away from frame assembly.
2. Place handle assembly onto frame
and connect handle to frame.
NOTE: Knobs are assembled to
the outside of frame.
3. Connect wand to gun. Tighten
securely.
D30333
All manuals and user guides at all-guides.com
ASSEMBLY
4.
8- ENG
Attach high pressure hose to gun.
Tighten securely.
5. To Assemble Accessories Panel
a. Remove top screws on
handle assembly.
b. Loosen bottom screws on
handle assembly.
Remove
Loosen
c. Place grooves in accessories
panel assembly onto screws
and slide panel assembly into
place.
Screws