Craftsman 919.672190 Mode D'emploi page 23

All manuals and user guides at all-guides.com
PROBLEM
No or low 1.
pressure (after
2.
period of nor-
mal use.)
3.
Water leaking
1.
at gun/wand
connection
2.
Water leaking 1.
at pump
2.
3.
4.
Pump
1.
Pulsates
CAUSE
Worn seal or packing.
Worn or obstructed
valves.
Worn unloader piston.
Worn or broken o-ring.
Loose hose connection.
Loose connections.
Piston packings worn.
Worn or broken o-rings.
Pump head or tubes
damaged from freezing.
Nozzle obstructed.
23- ENG
CORRECTION
1. Have replaced by AWSC.
2. Have replaced by AWSC.
3. Have replaced by AWSC.
1. Check and replace.
2. Tighten.
1. Tighten.
2. Have replaced by AWSC.
3. Have replaced by AWSC.
4. Have replaced by AWSC.
1. See Spray Wand paragraph
in the Maintenance section
for the correct procedure.
D30333