Panasonic GP-US932CSXE Mode D'emploi page 9

Major operating controls and their functions
Camera head (Option)
q Lens mount section
e Tripod mount base
Important:
• Be sure to turn off the power of the CCU before con-
necting or disconnecting the camera cable.
• Avoid bending excessively or breaking the camera
cable.
• Use the specific-camera head only.
Camera control unit (CCU)
<Front>
y Gain selection button [GAIN]
t Scene file selection button [SCENE]
r Power switch [DC POWER]
!0 Color bar display/AWC button [BAR AWC ]
Power switch [DC POWER]
r
This switch toggles the power of the CCU and camera
head on and off. The switch lights green while the power
is turned on.
All manuals and user guides at all-guides.com
w Camera cable
connector
u Freeze/menu button [FREEZE MENU ]
!1 Dynamic range selection button [D RANGE]
Lens mount section
q
A C-mount lens is mounted on this section. (☞ Page
15)
Camera cable connector
w
The camera cable (option) is connected to this connec-
tor.
<HD Camera Cable>
• GP-CA932/4E (4 m)
• GP-CA9320/6E (6 m)
• GP-CA932/10E (10 m)
Tripod mount base
e
The tripod socket hole is used when the camera head is
secured to the tripod.
The tripod mount base can be mounted on either top or
bottom of the camera head.
Tripod socket hole: 1/4-20 UNC
i Selection button [SEL]
o Up/Down/Left/Right button [g/h/e/f]
Scene file selection button [SCENE]
t
The button selects a scene file from 1 to 3. Each scene
file should be set up beforehand using the SETUP
menu. (☞ Page 22)
Selection of a scene file turns on the green indicator of
the selected file number.
!2 Camera cable connector
9