Panasonic GP-US932CSXE Mode D'emploi page 15

Les langues disponibles

How to mount lens

Important:

•

A lens whose projection length of the lens mount section is 4 mm or less shall be

used.

•

The recommended lens aperture ranges from F2.2 to F16. Selection of less than F2.2

of the lens aperture may result in image blurring.

•

When a zoom lens is used, focus adjustment method varies with the lens. For further

information, refer to the operating instructions for the lens to be used.

•

When the lens is removed, be sure to put the cap on the lens mount section of the

camera head.

Step 1

Remove the cap from the lens mount section of the camera

head.

Important:

•

Check to see whether the surface of the optical filter is

clean before mounting a lens. If the surface is dirty, use

a blower brush for general camera to remove dust.

Recommended lenses (As of September, 2012)

Manufacturer

FUJINON

All manuals and user guides at all-guides.com

Product name

High Definition Fixed Lens

High Definition Zoom Lens

3CCD Camera Lens

Step 2

Turn a C-mount lens clockwise to engage the lens with the

lens mount section.

Model

HAF4.8DA-1

XA4x7.5DA-1

TF2.8DA-8

TF4DA-8

TF8DA-8B

TF15DA-8

C mount:

4 mm or less