General Remarks; Important Remark - ADB 300 Manuel D'utilisation

A 56 C
A 57 F
A 59 Z
Advice before use
• Read attentively these instructions.
• As the equipment is delivered, open packings
and inspect the equipment carefully.
If you notice any damage, contact
immediately the transport company and
register your complaint in due form with
mention of the defects.
Be sure that this equipment left our factory in
perfect condition.
• Check if the received equipment is consistent
with the delivery notice and if this delivery notice
is consistent with your order.
If it is not, contact immediately your supplier.

General Remarks

This luminaire is a part of lighting equipment
designed for professional use only in theatre, indoor
television or cinema shootings.
Designed and built in accordance with the
EN 60598-1 and EN 605598-2-17safety
regulations, it must imperatively be connected
to earth by means of its earth wire.
To prevent any electrical shock, there is no need
to open this equipment during operation.
Nevertheless:
• protection devices and lenses have to be
replaced if they are visibly damaged so their
efficiency might be reduced; for example in
case of deep cracks or scratches.
• lamp must be changed if damaged or distorted
by heat.
P a g e 1 0
Issue 002
If internal access is needed for control, service or
repair purposes, always refer to qualified personnel.
In all events, always unplug the power supply cable
before opening,
LethaL VoLtage present inside
It is the user's responsibility to use the luminaire for
its intented purpose and to check the equipment
that might be connected to it.
The luminaire can under no circumstances be
modified. ADB will not assume any responsibility in
case of damage resulting from modications made
to the luminaire.
This luminaire is a piece of professional equipment
designed for easy and simple use. Nevertheless,
always refer to qualified personnel for any
installation or repair.

Important Remark

Power supply cables and other connections are
essential for your equipment, they play a great part
in safety and good working order.
• Always hold the plug when disconnecting a
cable, never pull the cable.
• Never use cables or connectors in bad
condition, check them when installing or at
regular intervals for fixed equipment.
• Never tie power supply cable and data cable
together.