Help Information; Stop Button - Snap-On EEWB334A Mode D'emploi

2
4-10
4-20
4-21
4-22
3
EEWB334A
4.7

Help Information

Help information explains the current action and, in
the case of an error code, provides hints for remedy.
Display help information
— Press the HELP key (Fig. 4-10, Pos. 3).
The fi rst screen with help information appears, e. g. to
the screen RIM DATA INPUT (Fig. 4-20).
Press the HELP key once more to display the next
—
screen with help information.
(if present)
The second screen with help information to the screen
RIM DATA INPUT (Fig. 4-21) appears.
Note:
On pressing the HELP key in the last screen with help
information the display jumps to the fi rst screen again.
Quit help information
Press the ESC key (Fig. 4-10, Pos. 2).
—
4.8

Stop Button

Refer to Figure 4-22.
To perform an immediate stop:
• Press the Stop button:
The electric motor brake is activated to stop wheel
rotation.
In the event the balancer stops unexpectedly:
Check to be sure all inputs were completed prior
to the balancing spin.
If all parameters are inputted correctly:
• Restart the machine:
turn off the unit
turn on the unit again.
• Using the proper procedure input the parameters
and rebalance the tire.
• If the unit does not function correctly,
WARNING: PREVENT ANY FURTHER USE OF THE
UNIT.
• Call service 800-225-5786.
19